Within the O-Calc Pro application, a variety of features are made available to a user. These available features are linked, in part, to the user level that is assigned. To determine what user level you have been assigned, simply open the application and check the status in the bottom left-hand corner, beneath the capacity window. ..
Archives : October-2017
O-Calc Pro has supported several types of guying in previous versions; these include down guys, span-head guys, sidewalk guys, and pushbraces. Additional guying options have been introduced that allow for the modeling of a truss guy, or a guy wire that can be used without having to touch the ground. Below is an image showing ..
Among the many tools included in O-Calc Pro is the option to utilize information collected with an IKE device. This article outlines how to utilize an IKE 3 device to collect data, and use that data to model a pole within the O-Calc Pro desktop software. The process for data collected from an IKE 4 ..
While the O-Calc Pro Software Program does include many features, the installation package for the program also includes several standalone tools that may be used outside of an O-Calc Pole modeling session. One of those tools is the Image Split/Merge utility, which allows for batch processing of images that either need to be embedded, or ..
Crossarm Analysis The detailed crossarm analysis report indicates to the user whether one or more crossarms on the pole are adequate or not. This can be helpful when a crossarm is flagged in red in the inventory window – the red coloring on the icon usually indicates that the crossarm is failing or inadequate in ..
The Clearance analysis tool provides the user with a way to assess for potential clearance violations when adding spans and equipment, or when setting a new pole. The Clearance Analysis options can be found under Tools > Clearance Analysis… in O-Calc Pro. From this list are several options, including Clearances and Violations, Show Clearance Rules, ..
Perhaps one of the most under-utilized features in O-Calc Pro is the ability to add Notes to an item. In addition to components that utilize pole capacity, it is also possible to add elements to the inventory list that do not contribute to the loading on the pole at all. One such item is a ..
This article outlines some of the basic concepts behind how Tensions Types and Sag are accounted for in O-Calc Pro. The full primer on this topic is linked to this article. Any cable attached between two structures will hang between these two structures following a catenary curve. Mathematically the catenary curve is a hyperbolic curve describing ..
This report provides more detailed information regarding the forces being applied to the pole in relation to wine pressure as dictated by the loadcase, and the worst wind direction which is determined during modeling of a structure. Figure 7. Applied Loads Summary Report LoadCase – Populated automatically based on the active loadcase in the inventory ..
Analysis Report – Page 1 Figure 1. Page 1 of Analysis Report Pole Num – set by the user in the data entry panel Aux Data Fields 1-6 – In this example, lines 2-7 on the left-hand side (PM Order Number – Aux Data 6) show where a user can enter custom fields. When a ..
Recent Comments